Our new website can be found at

www.theaquariumsolution.com

Click on the image above to be redirected to the new site

or continue below to the old site

 

 

The Aquastat Type A is a simple system for controlling water loss due to evaporative loss.

The unit consists of a float switch with a universal bracket, which will allow mounting on a tank, sump or stress bar plus a switched plug bar. As the water level drops it is sensed by the float switch and energises the plug bar. The socket on the plug bar then provides a live supply to operate a fresh water top up pump or control a solenoid for an RO unit. As the float rises with the water level the power to the pump is switched off again. Two LED's on the plug bar inform you of the status of the socket at any time Simple.

 
 

Aquarium water is subject to constant evaporation which if left for a period of time will cause salinity change, causing the aquarium environment to come under stress.

Deltec Top-Up System 33Ltr (Saltwater Aquariums only)


Capacity:

33 Ltrs (7.3gals)
Includes Tank, pumps and Floatswitch


Tank Size:

L: 270mm W: 300mm H: 400mm


Article No:

60911


 

Deltec Top-Up System 54Ltr (Saltwater Aquariums only)


Capacity:

54 Ltrs (12gals)
Includes Tank, pumps and Floatswitch


Tank Size:

L: 300mm W: 450mm H: 400mm


Article No:

60912


* Conversion 4.5litres = 1 Gallon (Imperial)

Click to download Instructions for use of the Top Up System.

Top-Up System